| Issue |
E3S Web Conf.
Volume 177, 2020
XVIII Scientific Forum “Ural Mining Decade” (UMD 2020)
|
|
|---|---|---|
| Article Number | 03014 | |
| Number of page(s) | 6 | |
| Section | Technical Sciences | |
| DOI | https://doi.org/10.1051/e3sconf/202017703014 | |
| Published online | 08 July 2020 | |
Development of engineering approach to the assessment of stress raisers in metal structures of dragline excavators
1 IMASH named after A.A. Blagonravov RAS, 101000, Moscow, Russian Federation
2 SUEK-KRASNOYARSK JSC, 660049, Krasnoyarsk, Russian Federation
3 FSBOU "Ural State Mining University", 620144, Yekaterinburg, Russian Federation
4 FSAOU "Siberian Federal University", 660041, Krasnoyarsk, Russian Federation
In the present work, its authors present the new results obtained on the creation and development of an engineering approach to the assessment of stress raisers in the metal structures of dragline excavators, convenient to be applied in the express diagnostics system to test the condition of such machines. The main result of this work is the conclusion that the value of the geometric stress concentration factor for the fillet weld of metal structures of the excavator arm EH-10/70A under working conditions can be written using the Afanasiev formula.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.