Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
---|---|---|
Article Number | 01037 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202017801037 | |
Published online | 09 July 2020 |
Method for designing energy-efficient ventilation systems based on regenerative heat exchangers
1
Vologda State University, Institute of civil engineering, 160000 Vologda Lenina str. 15, Russia
2
Kazan State Power Engineering University, Kazan, Russia
* Corresponding author: nikolay-monarkin@yandex.ru
The method of designing ventilation systems based on stationary switching regenerative heat exchangers is presented. Recommendations for selection of rational device parameters are given and substantiated. The diameter and thickness of a single channel wall of regenerative nozzle; the total diameter and length of nozzle; the time of heat accumulation or regeneration stages; the heat capacity and density of nozzle material; air flow rate are considered.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.