Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
---|---|---|
Article Number | 01023 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202018401023 | |
Published online | 19 August 2020 |
IMPROVEMENT OF CHARACTERISTICS OF AISI 310 GRADE STAINLESS STEEL MATERIAL BY CARBURIZING
1 PG Student, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India
2 Associate Professor, Mechanical Engineering Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India
* Corresponding author: vamshimanne96@gmail.com
. The investigation on the microstructure and mechanical behaviour of steel AISI 310 has been carried out during a Carburizing process aiming to improve the wear performance. The comparision study was made to treated specimens with untreated sample. Carburizing is a viable technique to enhance the wear resistance of the stainless steel material. The present study focused in the direction of investigating the effect of microstructure, hardness and wear resistance of AISI 310 stainless steel material. In carburizing process the case depth is found to be 11.5, 12, 14 Microns which is treated 2 hrs, 4hrs and 6 hrs respectively. The combination action of strong adhesion, abrasion and severe plastic deformation are the primary reasons for the continuous material loss in the untreated specimens during testing. The Optical microscope, SEM analysis and wear test are conducted to find out the various results
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.