Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
---|---|---|
Article Number | 01057 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202018401057 | |
Published online | 19 August 2020 |
DSP based Voltage Source Inverter for an application of Induction Motor control
1 UG Student, Associate Professor, Professor Department of Electrical and Electronics Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
2 UG Student, Associate Professor, Professor Department of Electrical and Electronics Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
3 UG Student, Associate Professor, Professor Department of Electrical and Electronics Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
The paper presents a Single-phase inverter configuration dependent on IGBTs utilizing a Digital Signal Processor by the SPWM method. The equipment configuration is actualized utilizing IGBT Inverter Module. The equipment results are examined in the paper. The IGBT, which requires 15v of activating pulse to their individual gates, is taken care of through the isolation circuit. The circuit is intended to enhance the pulse from the DSP controller, up to the necessary abundancy, and goes about as an isolation circuit. The inverter input is given through the DC rectifier circuit with consistent voltage, and the output is Controllable AC with variable voltage and frequency.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.