Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
---|---|---|
Article Number | 01076 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202018401076 | |
Published online | 19 August 2020 |
Performance evaluation of nano-silica concrete
1 Research Scholar of Civil Engineering, JNTUH CEH, Hyderabad.
2 Ex-Professor, JNTUH CEH and Professor, CVR College of Engineering, Hyderabad
3 Professor, Department of Civil Engineering, GRIET, Hyderabad. Email id: vempada@gmail.com
4 Professor, Department of Civil Engineering, VJIT, Hyderabad.
In this paper, the study of the influence of nano-silica (nano-SiO2) on the properties of the interface between CSH gel and cement particles and its effect on nano-mechanical properties of the products at the interface zone was examined. In this paper M50 grade SCC mixes were developed using 5% micro-silica and various percentages of 0.5%, 1.0% and 1.5% nano-SiO2. For 1.0% nano-SiO2 addition to M50 grade SCC mix, the compressive strength is maximum. Similarly concrete quality using non-destructive techniques, water absorbtion capacity and porosity are also assessed.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.