| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01108 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401108 | |
| Published online | 19 August 2020 | |
PERFORMANCE OF CONCRETE BY USING HYPO SLUDGE AS A MINERAL ADMIXTURE
1 Head of the Department, Department of Civil Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
2 Post graduation student, Department of Civil Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, India.
Increase in the paper waste from paper industries become most serious disposal problem by occupying large space and environmental pollution which is raising every day. To reduce the paper waste and environmental pollution, it is proposed to use the paper waste as Hypo sludge in concrete mix which contains cementitious properties like silica and magnesium. The main ingredient of concrete is cement. During the manufacturing of cement, large amount of carbon dioxide is released into the environment which causes global warming. To control environmental pollution from cement industries, Hypo sludge is used as a partial replacement of cement so that it can reduce cement content and support as an eco-friendly building material. In this research cement is replaced with fly ash and Hypo sludge. By adding 0 percent,3 percent,6 percent,9 percent 12percent and 15percent of hypo sludge, compressive and split tensile strength of concrete and also performance of Hypo sludge concrete are studied. From the experiment, compressive strength and split tensile strength of Hypo sludge concrete increases up to optimum dosage.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.