| Issue |
E3S Web Conf.
Volume 189, 2020
2020 International Conference on Agricultural Science and Technology and Food Engineering (ASTFE 2020)
|
|
|---|---|---|
| Article Number | 03006 | |
| Number of page(s) | 3 | |
| Section | Natural Resources and Environmental Studies | |
| DOI | https://doi.org/10.1051/e3sconf/202018903006 | |
| Published online | 15 September 2020 | |
On the research of cultural relic restoration under reverse design
1
School of Automation and Information Engineering, Xi’an University of Technology, Xi’an 710048, China
2
Department of Industrial Design, Xi’an University of Technology, Xi’an, 710054, China
3
Department of Industrial Design, Xi’an University of Technology, Xi’an, 710054, China
4
Department of Industrial Design, Xi’an University of Technology, Xi’an, 710054, China
* Corresponding author’s e-mail: 1064068962@qq.com
At present, artificial restoration of cultural relics has been unable to solve the difficulties in restoration and protection of cultural relics, as well as low restoration rate a series of problems. In order to solve the above problems, this article conducts in-depth research on the emerging computer technology that can be used for cultural relic restoration, and proposes a computer-aided cultural relic restoration and reconstruction process based on the reverse design method, and explains the application of 3D printing technology to the restoration of ceramic cultural relics. In this paper, the unearthed cultural relics are protected to the maximum extent research, which provides a reference for improving the scientific nature and durability of cultural relics protection and inheritance.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.