| Issue |
E3S Web Conf.
Volume 191, 2020
2020 The 3rd International Conference on Renewable Energy and Environment Engineering (REEE 2020)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 5 | |
| Section | Modern Electronic Technology and Application | |
| DOI | https://doi.org/10.1051/e3sconf/202019104005 | |
| Published online | 24 September 2020 | |
Estimate Mass Flow Rate of Dense Phased Powder Solids
1 School of Control and Computer Engineering, North China Electric Power University, Beijing, 102206, China
2 School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing, 102206, China
3 Department of Computer Engineering, Bahria University Islamabad Campus, Islamabad, Pakistan
* Corresponding author: uabrar@gmail.com
The complex multiphase gas-solid flow has always been a point of attraction for researchers over the past decade to explore the sensing techniques to sense and measure the mass flow. Weather dilute or dense phase flow, the gas-solid flow measurement generally requires velocity profile and volumetric concentration measurement to find the mass flow rate. The nature of the solids, the environmental factors-specially moisture adversely affects the sensor readings-specifically when it is non-invasive capacitive sensors. Gas-solid flow finds its applications in power plants, food, chemical, automobile, and pharmaceutical industries. This paper aims to explore the evolution of a novel approach of using load cell in conjunction with capacitive electrodes for calculating the mass flow rate of the solids.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.