E3S Web Conf.
Volume 193, 2020International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2020)
|Number of page(s)||7|
|Published online||08 October 2020|
Design features of agricultural transporting technological device equipped with agrophilic wheel mower
Center of technical cooperation at MGTU named N.E. Baumana, Gospitalniy pereulok, 10, Moscow, 105005, Russia
2 Federal Scientific Agro-Engineering Center VIM, 1 Institutsky proezd, 5, Moscow, 109428, Russia
3 Belarusian National Technical University, Independence Ave., 65, 1st building, Minsk, 220013, Belarus
* Corresponding author: firstname.lastname@example.org
Now days there is no a single mass-produced vehicle for agriculture which does not match requirements of the state standard for the maximum allowable impact of movers on the soil. This leads to significant losses and under-harvest of agricultural products. As a promising direction for increasing the efficiency of the transport infrastructure of agricultural production, it is proposed to develop an environmentally friendly transport and technological chassis for agricultural purposes.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.