E3S Web Conf.
Volume 194, 20202020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|Number of page(s)||4|
|Section||Environmental Engineering, Ecological Environment and Urban Construction|
|Published online||15 October 2020|
Design of New Submerged Ozone Generator
1 School of mechanical engineering, Hubei University of Automotive Technology , Hubei Shiyan , 442002, China
* Corresponding author: email@example.com
In order to meet the demand of adjustable ozone concentration and reduce energy consumption, a new submerged ozone generator was designed. The nozzle, reaction chamber and electrode plate were studied and optimized. The mechanical structure design of the device was completed. The electrical circuit model was built by Matlab/Simulink, the design of power system is completed. The results show that the generation and reaction of ozone are completed in the treated water to effectively reduce the temperature of the reaction chamber. Moreover, by adjusting the parameters of discharge gap and cathode plate area, ozone can be adjusted as requirement to meet the purification requirements of different water bodies. It provides the technical information and data support for further experimental research and application of the new submerged ozone generator.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.