| Issue |
E3S Web Conf.
Volume 198, 2020
2020 10th Chinese Geosynthetics Conference & International Symposium on Civil Engineering and Geosynthetics (ISCEG 2020)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 4 | |
| Section | Geosynthetics Applied Design Theory and Method | |
| DOI | https://doi.org/10.1051/e3sconf/202019801031 | |
| Published online | 26 October 2020 | |
Research on the preparation of a new type steel slag ceramics with steel slag and coal ash
Shenyang Urban Construction University 110167
Along with our rapid development of steel industry, the output of steel slag was increasing these yesrs. But all kinds of industrial waste emissions increased rapidly too. Application of good solid wastes such as coal ash and mineral powder is under low utilization rate, a large number of accumulation is serious threat to the environment and other issues. Therefore, research on the preparation of a new type steel slag ceramics with steel slag and coal ash is important to improve the industrial solid waste resource utilization. In this paper, the new type of steel slag ceramics was prepared by industrial waste steel slag and industrial waste coal ash, and the new type of steel slag ceramics was prepared by appropriate sintering process system. Meanwhile, the performance indexes of ceramic bricks were tested to determine the influence of different factors on the performance of the new type of steel slag ceramics.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.