| Issue |
E3S Web Conf.
Volume 198, 2020
2020 10th Chinese Geosynthetics Conference & International Symposium on Civil Engineering and Geosynthetics (ISCEG 2020)
|
|
|---|---|---|
| Article Number | 01045 | |
| Number of page(s) | 5 | |
| Section | Geosynthetics Applied Design Theory and Method | |
| DOI | https://doi.org/10.1051/e3sconf/202019801045 | |
| Published online | 26 October 2020 | |
Research on Interfacial Bonding Properties and Engineering Applications of Polymer Modified Mortar
1 College of Aeronautics Engineering, Air Force Engineering University, Xi’an, Shaanxi, 710038, China
2 College of Mechanics and Civil Engineering, Northwestern Polytechnical University, Xi’an, Shaanxi, 710072, China
Using the slotting method to process the interface of ordinary mortar, based on ordinary mortar specimens, new and old mortar bonding specimens were prepared, and the bond strength test was carried out. The effect of interface roughness on the bonding strength of VAE rubber powder modified mortar and styrene-acrylic emulsion modified mortar was tested, and then the interfacial bonding properties of polymer modified mortar were studied. The test results show that the bonding strength of polymer-modified mortar increases with the increase of interface roughness; in engineering applications, the interface can be properly chiseled to increase the interface roughness, which is beneficial to the bonding of polymer-modified mortar firm. At the same time, the application prospects of VAE rubber powder modified mortar in the field of concrete anti-corrosion, and the application prospect of styrene-acrylic emulsion modified mortar in the repair and freeze-thaw damage of concrete structure and anti-seepage treatment are prospected.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.