Issue |
E3S Web Conf.
Volume 201, 2020
Ukrainian School of Mining Engineering - 2020
|
|
---|---|---|
Article Number | 01037 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/202020101037 | |
Published online | 23 October 2020 |
Basics of the approach formation to substantiate the temperature field distribution during experimental research on the coal gasification processes
1 Dnipro University of Technology, Department of Underground Mining, 19 Yavornytskoho Ave., 49005 Dnipro, Ukraine
2 Dnipro University of Technology, Department of Labor Safety and Civil Security, 19 Yavornytskoho Ave., 49005 Dnipro, Ukraine
3 Universidad Nacional de San Agustin de Arequipa, Institute of Renewable Energy Research and Energy Efficiency, 107 San Agustin Str., Arequipa 04000, Peru
* Corresponding author: saik.nmu@gmail.com
This paper studies the problems related to the research on the temperature conditions during the coal seam gasification. In particular, while maintaining the identity of the “model – nature” system. A review of the specific application of thermal imaging equipment and thermoelectric transducers (thermocouples) is given. Approaches to the research into the gasification modes using thermocouples on a laboratory setup are described and the main disadvantages of their application are revealed. The dependences have been obtained of the change in the temperature field depending on the gasification modes (ignition process, reverse operations, gasification mode). Recommendations have been developed on the possibility of using thermal imaging equipment (thermal imagers) when studying the temperature field of the gasification process in laboratory conditions.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.