E3S Web Conf.
Volume 202, 2020The 5th International Conference on Energy, Environmental and Information System (ICENIS 2020)
|Number of page(s)||10|
|Section||Energy and Instruments|
|Published online||10 November 2020|
Design of testing Method of Fuels Filling Measurement Instrument
1 Department of Industrial Engineering, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
2 Department of Electrical Engineering, Faculty of Engineering, Diponegoro University, Semarang – Indonesia
3 Department of Regional and Urban Planning, Faculty of Engineering, Diponegoro University, Semarang – Indonesia
* Corresponding author: email@example.com
In this paper we have proposed a technique as a testing method for the instrument of measuring the amount of fuel filled in motorbike fuel tank. The instrument used a fluid flow meter that can be used easily by consumers to check the accuracy of gas station filler gauge. The study aims to develop a prototype of fluid flow measurement devices and a digital reporting system through IoT. The research phase consists of designing a fluid flow equipment, designing a color detection device, and designing a reporting system with IoT. Reporting application uses the smartphone system as a display of measurement results from flow meters and color detectors. Testing the function of the accuracy of the flow sensor on the tool is done by using a calibration factor. The output of measurements are fuel volume discharge, type of fluid and the result are shown on smartphone which connected to the internet for its reporting system.
Key words: instrument / testing method / fluid flow meter / digital reporting system
© The Authors, published by EDP Sciences, 2020
Initial download of the metrics may take a while.