| Issue |
E3S Web Conf.
Volume 206, 2020
2020 2nd International Conference on Geoscience and Environmental Chemistry (ICGEC 2020)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 6 | |
| Section | Earth Climate Change And Environmental Chemical Pollution Control | |
| DOI | https://doi.org/10.1051/e3sconf/202020602005 | |
| Published online | 11 November 2020 | |
Comparison and Selection of Sewage Outlet of a Refining and Chemical Project Based on Mike21 Model
1 Laboratory of Waterway Environmental Protection Technology, Tianjin Water Transport Engineering Science Research Institute, Tianjin 300456, China
* Corresponding author: maotianyu@foxmail.com
The Mike21 model is used to conduct a numerical simulation study on the setting plan of the warm water outlet of a refining and chemical project. After determining the environmental conditions, formulate key constraints. Through the parameter setting of the model, a hydrodynamic model is established, and numerical simulation of temperature and drainage under several combinations of different schemes is carried out. According to the prediction results of the model, the results under different emission conditions in winter and summer and under different environmental conditions can be compared and analyzed, combined with the requirements of environmental conditions, and optimized, thereby obtaining relatively optimized site selection conditions. Through the process of comparison and selection, the implementation method and application process of the Mike21 model for numerical simulation of warm drainage are proposed, and the application focus of the selection of the location of warm drainage outlets is summarized.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.