| Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
|---|---|---|
| Article Number | 05010 | |
| Number of page(s) | 10 | |
| Section | Plant Growing and Cereal Grain | |
| DOI | https://doi.org/10.1051/e3sconf/202021005010 | |
| Published online | 04 December 2020 | |
Innovative study on pneumatic separation of grain heap and economic feasibility of design versions
1 Don State Technical University, 344003, Gagarin sq., 1, Rostov on Don, Russia
2 Rostov State University of Economics, 344002, Bolshaya Sadovaya, 69, Rostov-on-Don, Russian Federation
* Corresponding author: mdk85@inbox.ru
The paper is dedicated to the innovative analytical research in the field of pneumatic separation concerning the issues of grain heap feed for harvester-thresher cleaning, composition of tailings and the amount of grain. The problem of improving the separation of air-sieve cleaning of modern combines is of great current interest. The cleaning design with the use of pneumatic and inertia separator of small grain heaps for high-producing harvester-thresher is developed. The engineering study is conducted for the installation of the 8-bladed rotor above the chaffer sieve for experimental cleaning taking into account dimensional limitations and minimal alteration of the current air-sieve cleaning. The results of the study show the opportunity of better operation of the design of small grain heap cleaning with the application of pneumatic and inertia separator. The developed solutions make it possible to reduce grain losses and increase the harvester-thresher productivity level, as a result of which it is expected to achieve the economic effect assessed in the study.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.