Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
---|---|---|
Article Number | 08004 | |
Number of page(s) | 11 | |
Section | Agricultural Machinery | |
DOI | https://doi.org/10.1051/e3sconf/202021008004 | |
Published online | 04 December 2020 |
Mathematical model to calculate the critical value of the angle of gradient for a tractor-mounted tilther
1 Gorsky State Agrarian University, 362040, 37, Kirova str., Vladikavkaz, Republic of North Ossetia-Alania, Russia
2 State Budgetary Educational Institution of Higher Professional Education “North-Caucasus State Medical Academy”. Vladikavkaz, Republic of North Ossetia-Alania, Russia
* Corresponding author: akudzaev@rambler.ru
The article is devoted to the search for a mathematical model convenient for practical calculations to determine the critical value of the angle of gradient for the tractor-mounted heavy tilther. It shows the existing mathematical model, which is then refined based on the stiffness of the elastic tractor wheels and their vertical reactions offset. Three methods of solving the resulting equations are analyzed, upon which the optimal one is chosen. As a result, a simple and convenient in practice mathematical model to determine the critical value of the angle of gradient for the tractor-mounted implement is obtained. The analysis of the calculation results showed that depending on the operating conditions and the weight of the tractor counterweight, the differences between the results calculated using the traditional and refined models can reach more than 4 degrees, which is very important to ensure the hill climbing safety.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.