| Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
|---|---|---|
| Article Number | 08005 | |
| Number of page(s) | 7 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202021008005 | |
| Published online | 04 December 2020 | |
Statistical model of metal removal removed from product surface under the influence of abrasive particle flow
Don State Technical University, Gagarin sq., 1, Rostov on Don, 344003, Russia
* Corresponding author: bys_ka87@mail.ru
A model is proposed that describes the forming processes of metal volume removed from the product surface during processing with a free abrasive flow, taking into account the random nature of abrasive particle impact on the surface and the possibility of implementing acts of elastic and plastic displacement of material or micro-cutting.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.