| Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
|---|---|---|
| Article Number | 08007 | |
| Number of page(s) | 9 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202021008007 | |
| Published online | 04 December 2020 | |
Substantiation of the parameters of an innovative working body for shallow tillage
1 State Scientific Establishment “Agricultural Research Center "Donskoy", 14, Lenin st., 347740, Zernograd, Russia
2 Don State Technical University, 1, Gagarin sq., 344003, Rostov on Don, Russia
* Corresponding author parkhomenko.galya@yandex.ru
The purpose of study: determine the rational parameters of an innovative working body that carries out a high-quality technological process of shallow soil cultivation. An innovative working body for shallow soil cultivation was developed on the basis of nature-like technologies that are currently relevant in scientific research. The ratio when using the golden ratio arises when comparing curvilinear and rectilinear, i.e. natural and artificial forms. The development of a new working body design is based on the physics of the interaction process with the processed environment, using analogies of shape and optimal proportions existing in nature. The working body design for shallow tillage with curved surfaces of increased streamlining using the configuration of natural sliding lines of the treated medium layer during cultivation has been developed. Depending on the required processing depth (6-16 cm), the innovative working body efficiently performs the cutting process with sliding, and also performs flat-cut loosening. Rational parameters and functioning modes of an innovative working body for shallow tillage have been obtained: length – 305 mm; working width – 450 mm; angle of crumbling, sharpening, posterior occipital cutting, mortar, rise – 15, 12, 10, 75-110, 10 degrees respectively; speed – 9-12 km/h.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.