| Issue |
E3S Web Conf.
Volume 210, 2020
Innovative Technologies in Science and Education (ITSE-2020)
|
|
|---|---|---|
| Article Number | 08017 | |
| Number of page(s) | 6 | |
| Section | Agricultural Machinery | |
| DOI | https://doi.org/10.1051/e3sconf/202021008017 | |
| Published online | 04 December 2020 | |
The incremental plasticity condition application for pure bending of a curved bar (Golovin problem)
1 Volgograd State Technical University, 28 Lenin Ave., Volgograd, 400005, Russia
2 Central research and design Institute of the Ministry of construction and housing and communal services of the Russian Federation, 29 Vernadsky Ave., Moscow, 119331, Russia
* Corresponding author: kalashnikovsu@mail.ru
The limiting elastic state of a bar with large curvature under pure bending is considered on the basis of the elasticity theory exact solution. As a criterion for the limiting state, the gradient plasticity condition is used, which determines the yield onset in an inhomogeneous stress state. Analytical expressions for calculating the corresponding stresses are obtained. The results comparison with a simplified solution is given.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.