Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
---|---|---|
Article Number | 07012 | |
Number of page(s) | 9 | |
Section | High-Performance Buildings, Energy Modeling, Heat & Mass Transfer | |
DOI | https://doi.org/10.1051/e3sconf/202340207012 | |
Published online | 19 July 2023 |
A new method for calculating volumetric structural elements in the general case of their stress-strain state
1 Kazan Federal University, 420008 Kazan, Russia
2 Kazan State Power Engineering University, 420066 Kazan, Russia
3 Don State Technical University, 344002 Rostov-on-Don, Russia
* Corresponding author: OlGNovoselov@mail.ru
The parametric equations of the strength surface in the space of internal force factors (IFF) are given for 9 forces and 9 moments in homogeneous anisotropic bodies. As special cases, similar equations are given for isotropic bodies that resist tension and compression differently (and equally). A variant of the kinematic method of the theory of limit equilibrium is proposed. A rigid-plastic model of a deformable solid body is used. It is assumed that massive structural elements are destroyed by dividing into parts that deform relatively little (“absolutely rigid finite elements”, ARFE) and have 6 degrees of freedom in three-dimensional space. The process of destruction of the material goes along infinitely thin generalized destruction surfaces (GDS), on which the work of all active IFFs is taken into account. To determine the minimum kinematically possible load, the simplex linear programming (LP) method was used.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.