| Issue |
E3S Web Conf.
Volume 212, 2020
2020 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2020)
|
|
|---|---|---|
| Article Number | 02019 | |
| Number of page(s) | 8 | |
| Section | Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202021202019 | |
| Published online | 26 November 2020 | |
Accidental actions values and combinations for key-elements checking
Brest State Technical University, 224017, Moskovskaya 267, Brest, Belarus
* Corresponding author: profturvic@gmail.com
In the case of accidental design situations, if accidental actions can be identified, one of the possible design strategies is checking the key element. This strategy minimizes the possibility of local failure and subsequent progressive collapse. The paper considers accidental action combinations and values of identified accidental loads according the various codes. The combination of actions for accidental design situation for checking of the “key-element” resistance was proposed. In addition, the values of the combination factors for variable loads and partial factors for permanent loads in accordance with required reliability class RC for structural element and values of accidental loads was proposed.
Key words: accidental design situation / accidental action / key-element / load combination / robustness
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.