| Issue |
E3S Web Conf.
Volume 213, 2020
2nd International Conference on Applied Chemistry and Industrial Catalysis (ACIC 2020)
|
|
|---|---|---|
| Article Number | 02026 | |
| Number of page(s) | 5 | |
| Section | Energy Mining Research and Composite Material Performance Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202021302026 | |
| Published online | 01 December 2020 | |
Modification Methods and Applications of CNTs/WPU Composite Material
School of Textile Science and Engineering, Xi’an Polytechnic University, Xi’an, 710000, China
Carbon nanotubes have lots of good properties, and occupy a great position in the field of science today. However, they also have some disadvantages, such as the existence of Van der Waals forces between the nanotubes bundle, which can result the attraction between the bundles and finally will cause more serious agglomeration. So researchers make the CNTs and WPU into the composite via solution blending, melt blending and in situ polymerization, in order to give play to the excellent properties of the two materials. This paper is aimed at summarizing various modification methods of CNTs/WPU composite material in the current research status and show the effects after each modification method. Finally, it can be concluded that there were differences between composites and the results of modification methods were affected.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.