E3S Web Conf.
Volume 213, 20202nd International Conference on Applied Chemistry and Industrial Catalysis (ACIC 2020)
|Number of page(s)||5|
|Section||Environmental Chemical Research and Energy-saving Technology Application|
|Published online||01 December 2020|
Automatic Identification and Importance Evaluation Technology of Power Transmission Section
Shenzhen Power Supply Corporation, Shenzhen 518048, Guangdong Province, China
2. Nari Technology Co., Ltd., Jiangsu Province, Nanjing, 211106
In theory, the cross section is the minimum cut set in the network. For the actual power grid, the transmission cross section is a collection of transmission lines between different regions, which is mainly used for power transmission to achieve the purpose of generating load balance. In this paper, a power grid zoning algorithm is proposed based on the topological structure characteristics and current operation state of the power grid, and the key transmission sections can be directly obtained without depending on the calculation of safety and stability margin. A practical system state partition model and key section sorting method are introduced, and a set of automatic identification method flow of key transmission sections of the system is established by searching for electrical betweenness. The importance of the transmission section is quantitatively evaluated from three angles: the margin from the stability limit, the hub position in the current power flow state, and the impact on the power grid after the power cut-off. The evaluation results can be used as a Reference for decision-making in the planning and reconstruction of the transmission section, safety monitoring, protection configuration, etc.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.