| Issue |
E3S Web of Conf.
Volume 216, 2020
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202021601019 | |
| Published online | 14 December 2020 | |
Parameter Evaluation Procedure for Gapped Core Current Transformers Considering Accuracy Requirements under Transient Conditions
1 System Operator of the United Power System, Relay Protection and Automation Department, Moscow, Russia
2 All-Russian Scientific, Research, Designing and Technological Institute of Relay Construction with Pilot Production, Cheboksary, Russia
3 Chuvash State University named after I.N. Ulianov, Faculty of Energy and Electrical Engineering, Cheboksary, Russia
* Corresponding author: onisova-vniir@ya.ru
Particular features of gapped core current transformers and characteristics of transient phenomena inside them are under consideration; a procedure is proposed that allows for evaluating the excitation limiting e.m.f. and overall dimensions of the CT required for installation, based on known parameters of the transient conditions in CT installation point and the specified CT error.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.