| Issue |
E3S Web of Conf.
Volume 216, 2020
Rudenko International Conference “Methodological problems in reliability study of large energy systems” (RSES 2020)
|
|
|---|---|---|
| Article Number | 01063 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/e3sconf/202021601063 | |
| Published online | 14 December 2020 | |
Testing digital instruments and power systems devices
1 Kazan State Power Engineering University, Kazan, Republic of Tatarstan, Russia
2 Penza State University, Penza, Russia
* Corresponding author: pavlov2510@mail.ru
Discussed here is a technique for testing digital devices based on the calculation and control of two or more characteristics of a binary electric signal at a reference point. Signals coming from a healthy and failed digital device that are indistinguishable by the value of one of the characteristics may differ in value of the other characteristic. The combination of test methods can significantly reduce the potential of not detecting the failure of digital device. The technique is aimed at increasing the information content of the healthy state monitoring results and the possibility of localizing failures in digital instruments and devices of power systems.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.