Issue |
E3S Web Conf.
Volume 218, 2020
2020 International Symposium on Energy, Environmental Science and Engineering (ISEESE 2020)
|
|
---|---|---|
Article Number | 02022 | |
Number of page(s) | 4 | |
Section | New Energy Development and Energy Sustainable Development Optimization | |
DOI | https://doi.org/10.1051/e3sconf/202021802022 | |
Published online | 11 December 2020 |
Experimental Study on Gas Breakthrough Prevention by Flue Gas Drive
1
State Key Lab Of Oil And Gas Reservoir Geology And Exploitation (Southwest Petroleum University), Chengdu, P.R. China
2
The Offshore Oil Production Plant, SINOPEC ShengliOilfield Company, Dongying P.R. China
a guopingswpi@vip.sina.com
*b Corresponding author: 17761292734@163.com
The heterogeneity of glutenite reservoir is serious, and breakthrough is easy to occur in the process of water drive and gas drive, which reduces the sweep efficiency. The serious vertical heterogeneity in the H well area of Xinjiang oilfield led to the rapid gas breakthrough during gas injection test. Water alternating gas flooding and foam profile control are often used to seal breakthrough. In this paper, based on the actual reservoir characteristics, vertical heterogeneous planar model is made for flooding experiment. The experimental results show that after gas breakthrough caused by water alternating gas flooding, the flue gas foam can effectively block the high permeability layer and develop the low permeability layer, improve the sweep efficiency and recovery percent, and provide reference for the development adjustment of actual reservoir after gas breakthrough.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.