E3S Web Conf.
Volume 218, 20202020 International Symposium on Energy, Environmental Science and Engineering (ISEESE 2020)
|Number of page(s)||4|
|Section||New Energy Development and Energy Sustainable Development Optimization|
|Published online||11 December 2020|
Research on the Application of Multi-view Image Matching Point Cloud in Engineering Quantity Calculation of Mining Area
School of Surveying Science and Technology, Xi’an University of Science and Technology, Xi’an 710054, China
a* Corresponding author: firstname.lastname@example.org
For mines with complex natural terrain conditions, especially for open pit mines with poor slope stability; traditional surveying and mapping techniques are difficult to accurately map engineering quantities and have certain safety hazards. Based on the actual production, this paper systematically studies the key technology of multi-view image matching point cloud in the calculation of mining area engineering quantity, and verifies the feasibility and accuracy of it, and compares it with GPS-RTK, traditional aerial survey and other data acquisition technologies. Comparative analysis shows that multi-view image matching point cloud technology has certain advantages in terms of time, accuracy, cost and security risks. 1, a*
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.