E3S Web Conf.
Volume 218, 20202020 International Symposium on Energy, Environmental Science and Engineering (ISEESE 2020)
|Number of page(s)||5|
|Section||Environmental Chemistry and Environmental Pollution Analysis and Control|
|Published online||11 December 2020|
Accuracy Check and Comparative Analysis of Horizontal Fiber-Optic Gyro Inclinometer in Freezing Hole
University of Science and Technology Beijing, Beijing 100083, China;
2 Beijing China Coal Mine Engineering Co., Ltd., Beijng 100013, China
Based on the principle of fiber-optic gyro inclinometer, the characteristics of horizontal freezing hole and the working conditions, it is analyzed that the horizontal hole fiber-optic gyroscope tilting technology for freezing holes is one of the most reliable methods. In order to verify the azimuth measurement error of the horizontal fiber optic-gyro inclinometer, the simulation test under the 1:1 working condition was carried out with the actual working conditions on site. Compared with the total station measurement data, it was concluded that 85.2% of the data is in measurement error within ±2°, 55.6% of the data is within ±1°, which verifies the reliability of the measurement data of the horizontal fiber-optic gyro inclinometer. At the test level of α=0.05, the azimuth test error accords with the normal distribution of μ=0.54 and σ=0.73. In the actual use process, the algorithm can be used to optimize the measurement data by taking multiple measurements and taking the average value in combination with the field conditions, so that the data can be closer to the true value.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.