E3S Web Conf.
Volume 220, 2020Sustainable Energy Systems: Innovative Perspectives (SES-2020)
|Number of page(s)||6|
|Published online||16 December 2020|
Reliability analysis of the existing reinforced concrete beams with normal cracks by rebar strength criteria
Vologda State University, Industrial and Civil Construction Department, Russian Federation
2 Kazan State Power Engineering University, str. Krasnoselskaya, 51, 420066, Kazan, Russia
* Corresponding author: email@example.com
The paper describes the problem of the reliability analysis for individual reinforced concrete (RC) beams by the rebar strength criterion in cross section with a normal crack. It is proposed to evaluate the stress in the rebar by measurements of the crack width at the level of the rebar using the functional dependence of the crack width and the strain (deformation) in the reinforcement. It is also proposed to replace the modulus of elasticity of steel reinforcement on the secant modulus of elasticity, taking into account the increased reinforcement strain in cross section with crack. The work considers two options of the crack width in beam: less and greater than the ultimate crack width. The reliability analysis of RC beams by the rebar strength is based on the possibility theory and fuzzy set theory by the reason of small statistical data from measurements on existing individual RC beams. The use of offered reliability analysis methods will allow preventing the failures of reinforced concrete beams and in some cases to obtain economic benefit from the possibility of further operation of RC beams with cracks, even with a crack width more than ultimate value.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.