Issue |
E3S Web Conf.
Volume 233, 2021
2020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|
|
---|---|---|
Article Number | 01038 | |
Number of page(s) | 4 | |
Section | NESEE2020-New Energy Science and Environmental Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202123301038 | |
Published online | 27 January 2021 |
Analysis of refrigeration and heating efficiency of ground source heat pump
School of Mechanical Engineering, Tianjin University of Commerce, Tianjin, China
* Wanfu Liu: wu_peihao0704@163.com
This paper studies the efficiency of ground source heat pump(GSHP) used in refrigeration and heating, comparing it with air source heat pump (ASHP) by means of theoretical analysis and experiment. The results were as follows, the cooling efficiency of GSHP in summer is higher than that of heating in winter because of the heat is transferred from high temperature to low temperature during cooling in summer, which can be compared to heat pipe; By calculating the power consumption of pump and fan, it is found that theoretically GSHP unit and system have higher heating efficiency than ASHP; The experiment shows that the daily average COP of the unit and the system is 4.22-4.62 and 3.26-3.55, respectively, both the unit COP and system COP of GSHP is higher than that of ASHP, which is consistent with the theoretical analysis.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.