E3S Web Conf.
Volume 233, 20212020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|Number of page(s)||5|
|Section||MEA2020-Mechanical Engineering and Automation|
|Published online||27 January 2021|
Noise characteristic analysis and sound sources identification for rod–airfoil interaction using different subgrid-scale models
1 Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Xiang tan, Hunan, 411201, China
2 School of Mathematics and Computational Science, Hunan University of Science and Technology, Xiang tan, Hunan, 411201, China
* Corresponding author: firstname.lastname@example.org
Four subgrid-scale models based on large eddy simulation (LES), such as Smagorinsky–Lilly (SL), dynamic Smagorinsky–Lilly (DSL), wall-adapting local eddy-viscosity (WALE), and dynamic kinetic-energy transport (KET) were used and couple Ffowcs Williams–Hawkings equation to accurately analyze and identify the characteristics and position of the sound sources of rod–airfoil interaction. The results of four models were compared with experimental data. It was found that the DSL model was the optimal subgrid-scale model for the study of the interaction noise considering the calculation accuracy. Therefore, the DSL model was selected for analyzing and identifying the characteristics and location of the interaction noise source. During the calculation, solid and permeable data surfaces were used for acoustic integral surfaces. The results show that the impact of the quadrupole source is negligible at a low Mach number, and the dipole noise coming from the pressure fluctuations is dominant. Meanwhile, the dipole noise from the airfoil is louder than that from the rod; the leading edge of about 30% chord length of airfoil the is the main sound source of interference effect. Above results can provide guidance for research of blade-vortex interaction noise.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.