| Issue |
E3S Web Conf.
Volume 233, 2021
2020 2nd International Academic Exchange Conference on Science and Technology Innovation (IAECST 2020)
|
|
|---|---|---|
| Article Number | 04037 | |
| Number of page(s) | 4 | |
| Section | MEA2020-Mechanical Engineering and Automation | |
| DOI | https://doi.org/10.1051/e3sconf/202123304037 | |
| Published online | 27 January 2021 | |
The Effect of Fixing Method on the Result of Ultrasonic Infrared Thermography Testing
1 Rocket Force University of Engineering, 710025 Xi’an Shaanxi, China
2 Project Management Center of PLA Rocket Force Equipment Department, 100085 Beijing, China
3 The 41 st Institute of The Sixth Academy of China Aerospace Science & Industry Corporation, 010010 Huhehaote Inner Mongolia Autonomous Region, China
* Corresponding author: 18119342611@163.com
Considering the influence of the fixing method of the component in the system on its results in ultrasonic infrared thermography testing, the detection experiments of the cracked plat structure with fixing at one end and fixing at two ends are carried out through different fixing methods of the equivalent structure. The results show that for the same structure to be detected, the more the bounds are fixed, the more the degrees of freedom are restricted, the less ultrasonic energy is dissipated during the inspection process, and the better the inspection effect. The work has positive significance for the selection of detection parameters in ultrasonic infrared thermography testing, helpful to provide some references for it.
© The Authors, published by EDP Sciences 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.