| Issue |
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
|
|
|---|---|---|
| Article Number | 02013 | |
| Number of page(s) | 4 | |
| Section | Electrical, Intrumentation and control, Dynamic Electricity | |
| DOI | https://doi.org/10.1051/e3sconf/202132802013 | |
| Published online | 06 December 2021 | |
Propagation Measurement on 2.5 mm NYAF Cable Using Load Matching and TDA
Department of Electrical Engineering, University of Trunojoyo Madura, 69162, Indonesia
* Corresponding author: dian.neipa@trunojoyo.ac.id
In this work, we propose measuring the propagation speed on the transmission medium in the form of a 2.5mm NYAF cable. The method used is load matching and time difference of arrival (TDA). The load matching method uses the same load as the characteristic impedance of the cable. While the TDA method measures two points on the cable with a capacitive load on the output side. From the results of the study, it was found that on the load impedance method, the average propagation speed on a 2.5mm NYAF cable is 1.9 × 108 m»s or 0.63 c. Meanwhile, in the time difference of arrival (TDA) method, the average propagation speed on a 2.5mm NYAF cable is 0.5 × 108 m»s or 0.17 c.
Key words: Propagation Speed / Load Matching / Time Difference of Arrival
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.