| Issue |
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
|
|
|---|---|---|
| Article Number | 04034 | |
| Number of page(s) | 6 | |
| Section | Information System, Big Data, Design Application, IOT | |
| DOI | https://doi.org/10.1051/e3sconf/202132804034 | |
| Published online | 06 December 2021 | |
Design and Modeling of IoT-based Sterilization Box using UV-C Radiation
Pembangunan Nasional University “Veteran” Jakarta, Engineering Department, Jakarta, Indonesia
* Corresponding author: annastasia_bd@yahoo.com
The design of the sterilization box is based on the ATmega2560 microcontroller which utilizes the concept of 254 nanometer UV-C shortwave radiation and disinfectant spray to increase the effectiveness of the sterilization box. In order to prevent transmission through touch from users through physical contact via sterilization box, researchers designed a system that can make users access sterilization box without the need to make physical contact with the device, namely by using IoT system with the help of applications that can be accessed through the user's smart device. Based on the results of the analysis and experiment that has been carried out, it is concluded that the sterilization box in this study can work optimally at a distance of less than 700 cm. This tool can operate using smartphone media via bluetooth HC-05 module, so it can minimize the process of spreading Covid-19 that occurs through physical contact.
Key words: IoT-based Sterilization / UV-C Radiation / Covid-19
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.