| Issue |
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
|
|
|---|---|---|
| Article Number | 07005 | |
| Number of page(s) | 4 | |
| Section | Mechanical, Computational & Simulation, Heat Treatment, Bio Composite | |
| DOI | https://doi.org/10.1051/e3sconf/202132807005 | |
| Published online | 06 December 2021 | |
Dye-Sensitized Solar Cell performance measurement analysis using Arduino Board
1 Department of Mechanical Engineering, Faculty of Engineering, Universitas Musamus, Merauke 99600, Indonesia
2 Department of Electrical Engineering, Faculty of Engineering, Universitas Musamus, Merauke 99600, Indonesia
* Corresponding author: hariyanto_ft@unmus.ac.id
Dye-Sensitized Solar Cell is a type of solar cell that is being developed by researchers around the world. The purpose of this research is to analyse the performance measurement of DSSC using Arduino Nano. The DSSC used as the sample is the result of fabrication with the pipette method and red fruit colouring material. The data measurement method is carried out in real-time using Arduino nano devices and sensors that have been assembled. The measurement results are presented in the form of graphs and tables, while the parameters measured include intensity, current, and voltage. While power is the current and voltage values, efficiency is the ratio between the input and output values. The value of the test results shows the maximum voltage value is 0.020 V, the current is 1.800 A, power is 0.036 W/m2, and efficiency is 0.007%.
Key words: DSSC / Exergy / Power / Efficiency / Arduino
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.