| Issue |
E3S Web Conf.
Volume 328, 2021
International Conference on Science and Technology (ICST 2021)
|
|
|---|---|---|
| Article Number | 10007 | |
| Number of page(s) | 4 | |
| Section | Resilience Infrastucture and Society, Transportation System, Smart Structure and Construction, Sustainability Infrastructure | |
| DOI | https://doi.org/10.1051/e3sconf/202132810007 | |
| Published online | 06 December 2021 | |
Investigation of relationship between cone penetration test and unit weight in cohesive soil (Study case: Gunung Anyar District)
UPN Veteran East Java, Civil Engineering Department, Indonesia
* Corresponding author: diansolin.ts@upnjatim.ac.id
Cone Penetration Test or CPT is one of soil investigation which is used to determine the mechanical properties of soil i.e., cone resistance and sleeve friction. Since several decades ago, CPT is often used as a common thread to determine the physical properties of soil such as soil unit weight of soil, soil behaviour type, etc. Thus, empirical approaches have been developed from various countries. However, these empirical approaches are not the same as the condition in Indonesia. Therefore, it is necessary to obtain and develop the suitable correlation for the type of cohesive soil. In this study, primary and secondary data were carried out from Gunung Anyar area. From statical analysis result, the regression shows less than 60% similarity of the model. In addition, the result of this study found that silt and clay soil types were found to dominate in Gunung Anyar area.
Key words: Cone Penetration / Empirical Approaches / Cohesive Soil
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.