Issue |
E3S Web Conf.
Volume 330, 2021
URM 2021 - International Scientific and Research Conference on Knowledge-Based Technologies in Development and Utilization of Mineral Resources
|
|
---|---|---|
Article Number | 01009 | |
Number of page(s) | 8 | |
Section | Geotechnology for Integrated Subsoil Development | |
DOI | https://doi.org/10.1051/e3sconf/202133001009 | |
Published online | 09 December 2021 |
Numerical modeling of the stress-strain state of peripheral massif in the vicinity of mine workings
1 Siberian State Industrial University, Novokuznetsk, 654000, Russia
2 University of Science and Technology Liaoning, Anshan, 14051, China
* Corresponding author: nik.am_78@mail.ru
In the process of numerical studies, the stress-strain state of the rock massif around the mine working driven at a depth of 600 m was determined. The article presents the analysis of the distribution of total vertical and horizontal stresses isolines in the working roof, as well as the ratio of the residual strength of rocks to the initial. The influence of the roof bolting on the displacement of working contour was established. Dangerous zones in the near-contour rocks of preparatory working were identified. The maximum exposure area of unsecured part of the roof during driving the workings in seam 3-3a was established.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.