| Issue |
E3S Web Conf.
Volume 245, 2021
2021 5th International Conference on Advances in Energy, Environment and Chemical Science (AEECS 2021)
|
|
|---|---|---|
| Article Number | 03087 | |
| Number of page(s) | 4 | |
| Section | Chemical Performance Research and Chemical Industry Technology Research and Development | |
| DOI | https://doi.org/10.1051/e3sconf/202124503087 | |
| Published online | 24 March 2021 | |
Design and analysis of magnetic matrix screw based on green manufacturing concept
Beijing Institute of Technology, ZH. Zhu Hai, China
* Email: 04043@zhbit.edu.cn
Lead screws are the most commonly used transmission components in tool machinery and precision machinery, and are widely used in various industrial equipment and precision instruments. However, the screw tooth profile squeezes and friction causes the gear to break, tooth surface wear, tooth surface pitting and other damage, which reduces the service life of the screw; the use of a large amount of lubricants can not ignore the environmental impact. The design and research of this subject are based on the traditional ball screw mechanism, and based on the magnetic field force, the force transmission and state transformation can be realized without contact. It has significant advantages in terms of improving product service life and reducing pollution caused by lubricating fluid, which is in line with the trend of green and sustainable development. This paper analyzes the principle of non-contact magnetic matrix structure and transmission principle, and conducts finite element analysis on the parameters of screw thrust and torque. Finally, a non-contact screw experimental platform is designed to verify the screw thrust.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.