High-temperature multilevel sterilization of canned goods with heat recovery and its constructive and technological support

¹ FSBEO HE Dagestan State Technical University, 367015 Makhachkala, Russia
² SEI HPE Dagestan State University of National Economy, 367008 Makhachkala, Russia

^* Corresponding author: akhmag49@mail.ru

Abstract

New technical solutions improving the process of thermal sterilization of canned products through the use of multilevel high-temperature modes and heat recovery have been considered and proposed. The essence of the developed method lies in the fact that the heat released by cooling cans with the product that has undergone thermal sterilization is used to heat other cans with the product queued for sterilization. In this mode of heat treatment, except in the last stage, the heat emitted by cooled cans that have already undergone heat treatment is used to heat up the canned food. Hence, the use of the principle of heat recovery by cooling canned products in the baths where others are simultaneously heated provides a significant saving of heat energy and water. Depending on the temperature parameters at different stages of the heat treatment, the heat recovery rate can reach up to 90%. The method also provides savings on cooling water. For the practical implementation of the developed method, the design of the device for multilevel high-temperature thermal sterilization of canned food with heat recovery has been developed. On the basis of experimental studies, new, multilevel high-temperature modes of apple compote sterilization have been developed.