Issue |
E3S Web Conf.
Volume 252, 2021
2021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
|
|
---|---|---|
Article Number | 02035 | |
Number of page(s) | 5 | |
Section | Research and Development of Electrical Equipment and Energy Nuclear Power Devices | |
DOI | https://doi.org/10.1051/e3sconf/202125202035 | |
Published online | 23 April 2021 |
Design of nuclear radiation detector for stack exhaust of plasma melting system
China Nuclear Power Technology Research Institute, Shenzhen 518031, China
* Corresponding author’s e-mail: leiqingxin@cgnpc.com.cn
The Plasma melting technology can reduce the low and medium level radioactive waste to a minimum. The emission of high-temperature radioactive aerosol generated in the process of treatment needs to be monitored. After treatment with a high efficiency filter and meeting national standards for gaseous effluents, it will be allowed to be discharged into the atmosphere. In order to achieve stable and reliable radiation monitoring, through the research on the radionuclide analysis of stack exhaust and the design of detector selection, the combined design of plastic scintillator & NaI scintillator is adopted. At the same time, the real-time and reliable monitoring of radioactive aerosols in stack gases under high temperature environment is also solved.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.