Issue |
E3S Web Conf.
Volume 253, 2021
2021 International Conference on Environmental and Engineering Management (EEM 2021)
|
|
---|---|---|
Article Number | 01068 | |
Number of page(s) | 4 | |
Section | Intelligent Environmental Monitoring and Quality Technology Assessment | |
DOI | https://doi.org/10.1051/e3sconf/202125301068 | |
Published online | 06 May 2021 |
Under the Processing of Network Data Images, the Position Recognition Technology of Mechanical Parts Based on "Mathematical Modeling" is Studied
Jilin Railway Technology College, Jilin China, 132200
With the development of the times and the progress of society, science and technology has been developing more and more rapidly. In this regard, modern society has been composed of science and technology. Compared with the original steam engine, Jenny textile machine and other industrial era starters, now the technology has entered the era of large machines. As a result, the processing of mechanical parts is becoming more and more complex than before. Therefore, the purpose of this paper is to use the network data image processing based on mathematical modeling of mechanical parts processing location recognition technology. After consulting the relevant literature on mechanical parts processing and location recognition technology, this paper goes to the factory to observe the mechanical working principle and mechanical working process, and then uses the two-dimensional spectral peak search algorithm to design the position recognition technology in the process of mechanical parts processing to process mechanical parts based on mathematical modeling. The experimental results show that the two-dimensional spectral peak search algorithm can make the system better point out the relevant problems in the process of mechanical parts processing and solve them intelligently, and if there are problems that cannot be solved, it will be fed back to the system informer in time to check. Finally, the accuracy and correctness of mechanical parts processing are improved, and some improvements are put forward for mechanical parts processing, which is of great help to mechanical parts processing.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.