Issue |
E3S Web Conf.
Volume 258, 2021
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2021)
|
|
---|---|---|
Article Number | 09027 | |
Number of page(s) | 9 | |
Section | Energy Efficiency in Construction | |
DOI | https://doi.org/10.1051/e3sconf/202125809027 | |
Published online | 20 May 2021 |
Problems of modelling the bond reinforcement in concrete
Moscow State University of Civil Engineering, 129377, Moscow, Russia
* Corresponding author: tamrazian@mail.ru
Traditional design research typically focuses on the design and construction of new structures, buildings and structures. A large proportion of existing concrete structures have wear problems. The longitudinal shear stress created by a load in reinforced concrete at the boundaries of concrete and reinforcement is considered. The parameters of numerous variables affecting this relationship are given, including the strength and cover of concrete, the type of reinforcement, the use of transverse reinforcement, the state of the reinforcement surface, the length of the anchorage, the stress state in the reinforcement, loading, and environmental influences. An empirical model obtained by the best comparison with test results is presented. The results of the mutual influence between loading and corrosion of reinforcing steel are presented. Research results show that loss of bond caused by structural failure becomes more critical compared to other types of failure as the life of the structure increases.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.