| Issue |
E3S Web Conf.
Volume 260, 2021
2021 International Conference on Advanced Energy, Power and Electrical Engineering (AEPEE2021)
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 5 | |
| Section | Advanced Energy and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202126001011 | |
| Published online | 19 May 2021 | |
An investigation and analysis of working environment pollution in a lighter manufacturer
Department of Environmental Engineering, Sichuan Vocational and Technical College, 1 Xuefu Road, Suining, Sichuan Privince, 629000, China
* Corresponding author: wyb285@sina.com
In odder to control and eliminate environmental pollution at the source and protect the health of workers, the noise and air quality of the working environment of a lighter manufacturer were investigated, sampled and tested on site by using the national standard method. The results showed that the noise of 8h Leq value in ultrasonic welding post was 87.5dB (A), which exceeded the national occupational health standard. The noise for 8h Leq value, dust and liquefied petroleum gas content of the other post were lower than that of the national occupational health standard limits. Comprehensive and effective pollution control measures are put forward
Key words: Working environment / Pollute / Protecting health / Noise / Dust / Measures
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.