E3S Web Conf.
Volume 261, 20212021 7th International Conference on Energy Materials and Environment Engineering (ICEMEE 2021)
|Number of page(s)||5|
|Section||Energy Chemistry Performance and Material Structure Analysis|
|Published online||21 May 2021|
Ce/Mo metal oxides synthesized with DBD plasma as efficient photocatalysts: Effect of Ce/Mo molar ratios
State Key Laboratory Base for Eco-Chemical Engineering, College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042 Shandong, China
* Corresponding author: Xumei Tao. E-mail: email@example.com
Ce/Mo metal oxides with different Ce/Mo molar ratios were synthesized via dielectric barrier discharge (DBD) method for the first time and applied as efficient photocatalysts. The morphology and physicochemical properties of the synthesized samples were characterized by XRD, SEM, BET and XPS. Ce/Mo metal oxides synthesized with Ce(NO3)3·6H2O and (NH4)6Mo7O24·4H2O molar ratio of 4:1 exhibited more surface chemical adsorption of oxygen, which were beneficial to the photocatalytic performance. The degradation rate of 1000 mL (50 mg/L) methyl orange could reach 80% within 18 min under UV-light radiation. Ce/Mo metal oxides exhibited excellent photocatalytic performance and had potential application prospect in dye wastewater treatment.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.