Issue |
E3S Web Conf.
Volume 262, 2021
1st International Scientific and Practical Conference “lnnovative Technologies in Environmental Engineering and Agroecosystems” (ITEEA 2021)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 5 | |
Section | Innovative Technologies, Engineering Systems and Energy in the Agro-industrial Complex | |
DOI | https://doi.org/10.1051/e3sconf/202126201007 | |
Published online | 24 May 2021 |
Development and research of metal-cladding additive to lubricants
Russian State Agrarian University- Moscow Timiryazev Agricultural Academy, 127550 Moscow Timiryazevskaya 49, Russia
* Corresponding author: vbalabanov@rgau-msha.ru
The article indicates that one of the directions of increasing the wear resistance of rubbing parts of machines and equipment, reducing friction losses and temperatures in the friction zone is the use of special metal-plating additives to lubricants. The Engineering Center of the Timiryazev Academy has developed an experimental metal-cladding additive under the code name “MP-21” based on a mixture of fatty acids (oleic, stearic, linoleic) and plastic metal salts of the same fatty acids. The tribotechnical properties of lubricating compositions with various additives in recommended concentrations were investigated on a modernized Timken-mashine friction machine in a steady state using samples from real rolling bearing assemblies. It has been established that the developed metal-cladding additive “MP-21”, along with the additive Renom Engine, provides maximum antiwear properties and allows to reduce the wear of rubbing samples in comparison with other investigated additives from 30% to several.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.