| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 01053 | |
| Number of page(s) | 7 | |
| Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202126401053 | |
| Published online | 02 June 2021 | |
Physicomathematical models of seeds and errors in calculating the volume of an electro terminator filled with seeds
Tashkent institute of irrigation and agricultural mechanization engineers, Tashkent, Uzbekistan
* Corresponding author: aquvvat@mail.ru
The article provides data on the impact of high-voltage current of electric spark discharges on the culture of gummosis located on the surface of cotton seed, and the article presents data on the impact of high-voltage electric spark discharges on the gummose culture located on the surface of the cotton seed. In this case, cotton seeds were taken as the basis for the physical model, consisting of three component parts, respectively, having a chalazal part, a lateral part, and a micropile. In the initial period of seed treatment, moisture penetrates the inside of the seed from the outside. Studied three-dimensional volumetric figures (hemisphere, cylinder, cone, etc.), carried out a literature review and mathematical calculations determined the calculation errors. The vessels of various shapes were compared. The prerequisites for determining the calculation errors have been made.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.