| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 10 | |
| Section | Road Construction, Building Structures and Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202126402016 | |
| Published online | 02 June 2021 | |
Technique for experimental studies of asphalt concrete milling process
Tashkent State Transport University, Uzbekistan
* Corresponding author: sharofiddin2306@mail.ru
The paper considers the issues of destruction of the working bodies of road-building equipment operated under conditions of abrasive wear with a fixed abrasive. Analytical studies of the influence of the tribological parameters of cutters on the intensity of their wear have been carried out. Based on the solution of the equations of the dynamics of the movement of the cutter in a viscoelastic medium, its geometric shape is optimized. The mathematical dependences of the influence of the geometric dimensions of the cutter on the pressure value and the intensity of tool wear are obtained.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.