Open Access
Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 02016 | |
Number of page(s) | 10 | |
Section | Road Construction, Building Structures and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202126402016 | |
Published online | 02 June 2021 |
- J. Xiang, X. Zhu, G. Chen, Z. Duan, Yan Lin, Ying Lin. Oxidation behavior of Fe40Al-xWC composite coatings obtained by high-velocity oxygen fuel thermal spray, Trans. Nonferrous Met. Soc, 19, pp. 1545–1550, China, (2009) [Google Scholar]
- H.-T. Wang, Ch.-J. Li, G.-J. Yang, Ch-X. Li. Effect of Heat Treatment on the Microstructure and Property of Cold-Sprayed Nanostructured FeAl /Al2O3 Intermetallic Coating, 83, pp. 146–152, (2009) [Google Scholar]
- N. Cinca, J.M. Guilemany. Thermal spraying of transition metal aluminides, An overview: Intermetallics, 24, pp. 60–72, (2012) [Google Scholar]
- Tulkun Ishanovich Askarxodjayev, Sharofiddin Asatullayevich Pirnayev Research of The Processes of Wering the Working Bodies of Road Mills International Journal of Psychological Rehabilitation, Vol. 24. Issue 07.2020 Issn: 1475-7192 Scope. Pp. 80528062 (2020) [Google Scholar]
- Senderowski C., Bojar Z., Roy G., Czujko T., Wolczynski W. Residual Stresses Determined by the Modified Sachs Method Within a Gas Detonation Sprayed Coatings of the Fe-Al Intermetallic, Archives of Metallurgy and Materials, 52 (4), pp. 10, (2007) [Google Scholar]
- Kumar S., Selvarajan V., Padmanabhan P.V., Sreekumar K.P. Characterization and comparison between ball milled and plasma processed iron-aluminium thermal spray coatings, Surface and Coatings Technology, 201, pp. 1267–1275, (2006) [Google Scholar]
- Wang H.T., Ch-J. Li, G.-J. Yang, Ch-X. Li. Cold Spraying of Fe/Al Powder mixture: Coating Characteristic and Influence of Heat Treatment on the Phase Structure, Applied Surface Science, 255, pp. 2538–2544, (2008) [Google Scholar]
- Sanjeev Chandra, Pierre Fauchais. Formation of Solid Splats During Thermal Spray Deposition, Journal of Thermal Spray Technology, 18 (2), pp. 148–180 (2009) [Google Scholar]
- Krasnoludkiy A.V. Determination of rational parameters of an eccentric road milling machine, Saratov, SSU, pp. 177, (2004) [Google Scholar]
- Kostelov M.V. Milling technologies for the repair and strengthening of road surfaces, Construction and real estate, JSe 7, pp. 28–30. (2001) [Google Scholar]
- Popov S.N., Antonyuk D.A. Analysis of the nature of wear and determination of performance criteria for the working bodies of road milling cutters, Problems of tribology, JN° 1, pp. 3–12. (2007) [Google Scholar]
- Gavrilin A.N., Moises B.B., Chervach Y.B., Rubtsov V.L., Borisov K.I., Melnov K.V., Khairullin A.R. Research methodology of rock characteristics during cutting and chipping with PDC cutters, POLZUNOVSKY VESTNIK JN° 4, pp. 80–83. (2016) [Google Scholar]
- Borisov K.I. Scientific method for assessing the effectiveness of dynamic processes of destruction of rocks when drilling wells with modern tools of cutting and shearing action, p. 193, Tomsk, (2012) [Google Scholar]
- Neskoromnykh V.V. Analytical study of the temporary strength characteristics of a rock during cutting-chipping with PDC cutters, Proceedings of TPU, 235(1), pp. 172178, (2014) [Google Scholar]
- Popov V.S., Lunyak V.L. Installation for testing surfacing materials during abrasive wear, Zavodskaya laboratory Metallurgy, 40 (2), pp. 231–232, (1974) [Google Scholar]
- Gaidyshev, I. Analysis and data processing, Special reference book, Saint-Petersburg, p. 750. (2001) [Google Scholar]
- GOST R 50779.21-2004 Statistical methods, Definition rules and methods for calculating statistical characteristics based on sample data [Google Scholar]
- S. D. Ignatov, N. S. Sherstnev. Analysis of the mathematical model of the working process of a road cutter during the destruction of asphalt concrete. SibADI, Omsk, Russia. SibADI Bulletin, issue 3 (55), 2017. - c. 120–124. [Google Scholar]
- Talerov, M.P. Increasing the efficiency of using rotary cutters of roadheaders by choosing rational geometric parameters of tools: dis. … Cand. tech. Sciences: 05.05.06 / Talerov Mikhail Pavlovich. - SPb., 2012.-- 147 p. [Google Scholar]
- Fomin K.V. Modeling and calculation of the probabilistic characteristics of the moment of resistance on the working body of the road milling machine. Scientific and Technical Bulletin of Bryansk State University, 2019, No. 3. pp. 407–417. [Google Scholar]
- Demidenko A.I., Snigerev D.S., Vaymer E. Yu., Sushko A.G. Laboratory tests of the knives of the soil milling cutter. Transport and technological machines. Bulletin of SibADI, issue 3 (17), 2010. - pp. 5–8. [Google Scholar]
- Lukash V.A., Virovets L.M., Melnichuk O.V. Analysis of the progress and the direction of the progress of the road studies // In collection. Abstracts VI Conf. “The effectiveness of the implementation of scientific, resource and industrial potential in modern conditions.” - pp. 320–322. [Google Scholar]
- Seliverstov, N.D. Influence of operating modes of road milling cutters and wear of cutting elements on the profile of the surface being formed. Seliverstov // Interstroymekh-2014: Materials of the Intern. scientific and technical. Conf., 2014. - pp. 77–81. [Google Scholar]
- Krasnoludkiy A.V. Determination of rational parameters of an eccentric road milling machine: Dis. … Cand. tech. sciences. - Saratov, SSU, 2004. - 177 p. [Google Scholar]
- Kostelov M.V. Milling technologies for the repair and strengthening of road surfaces // Construction and real estate, 2001. -JN7 - pp. 28–30. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.