Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 02023 | |
Number of page(s) | 9 | |
Section | Road Construction, Building Structures and Materials | |
DOI | https://doi.org/10.1051/e3sconf/202126402023 | |
Published online | 02 June 2021 |
Improving the optimal composition of heat-insulating structural aerated concrete based on industrial waste
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: shoumarovss@gmail.com
This article presents the results of experimental research, which characterizes the parameters and properties of the porous structure of aerated concrete based on industrial waste. Structurally optimal parameters representing the physical-mechanical, thermal-technical properties of aerated concrete-based exterior wall structures have been identified. The test results were carried out in research laboratories using aerated block constructions with an optimal composition of high porosity and improved technological solutions of autoclaved aerated concrete.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.